How to maintain the wire rope of the bridge erector?

How to maintain the wire rope of the bridge erector?
Bridge erecting machine is composed of various components, and any seemingly insignificant small components play an important role. Therefore, regular maintenance of the bridge erecting machine is one of the important methods to extend the service life of the bridge erecting machine.

Bridge erecting machine is an important mechanical equipment for beam erection construction. Wire rope is a key component in the design of bridge erecting machine. Therefore, the maintenance of the wire rope of the bridge erecting machine cannot be ignored. In order to maintain the wire rope well, special attention must be paid to the corrosion protection of the wire rope in the daily maintenance and repair.

1. In order to apply oil frequently, it is necessary to apply oil to the steel wire rope that moves frequently. The hemp core of the new steel wire rope generally contains 12% ~ 15% grease, while the scrap steel wire rope contains only 2.4% grease in the most severely worn parts. Even if it does not pass through the pulley, the rope end of the same steel wire rope also contains 12.7% ~ 14.5 % Of grease.

2. If you replace the steel wire rope with a new one, be careful not to knot or entangle it, so as to avoid unnecessary accidents during use.

3. Special attention should be paid to replacing the wire rope. The wire rope is the vulnerable part. If severe wear or disconnection is found during use, it must be replaced in time. Because the wire rope of the bridge erecting machine bears the important role of lifting, the maintenance of the wire rope of the bridge erecting machine must be put in the first place.